Відео

Hey I have it’s same motor. How did you do this without removing the crank pulley and belts. I always thought that if you change the tensioner. You should replace the belt. My situation is that the the water pump and components have been replacedd before except for the hydraulic tensioner. Can I do this without removing the every (minus the timing covers)

Do you absolutely need the angled feeler guages?

Hi everybody Can I take this part number?

I have to admit it is sad that you have to dismantle half the engine to replace spark plugs and coil. I think I'll leave it to someone who knows what they're doing.

I have a p0300 error code but I’ve changed coils plugs fuel injector and my car runs clean but the code comes up every now and again why

Do you have the part number for that tensioner?

Hello i have a 2012 nissan Maxima. Im sure i have A starter issue. But im not sure bc i have orange key light on the dash.A friend told me that the light will apear when it has a bad starter or alternator. Any ideas will help thank yall!

Thanks

Thanks 1000 times for this video. Indeed when Phillip can do it than Casper as well. You inspired me to try do it by myself.

How much would you charge someone to change the tension belt?

My first move is swapping all the relays if they are all the same

Had the same problem with my accord. Watched every videos related to high and low idling and still had the same problems. I was lucky to get your video and it made a difference. You saved me two weeks of headaches. Did exactly what you told to do. Thanks for sharing your expertise.

Good job. Thanks, very helpful 🙏🤙😎

Thank you!!

I heard the timing belt pulley tensioner bearing is a little dry sound you should just change everything timing belt kit so engine last another 100K miles or more. Next time buy a car with timing chain.

I'm looking at radiators for my 2006 Camry. Do I want a internal transmission cooler in my radiator or without what does it matter

I thought he saved my life. The truck started running but it was only for a minute. But it was enough for me to pay $239 for a towing. He is right, this is how you diagnose and solve but it might not give you enough time to drive. It was my first signal for the issue. If you have a problem with your fuel pump, just replace it before you drive

Hi was wondering what the 'upgraded relay' number was or what you were calling it? Video was blury for that image.

شكرا على الفيديوهات الحلوه والراقيه

Somic😂❤.

This is probably the most user-friendly cylinder design I have seen.

Is the throwout bearing supposed to spin all the time?

How long did it take him to do the Job? If anyone knows.

Excelente vídeo!

excellent educated video,, BUT my f150 is the year---2021,, fx4 off road,, will it be the same to fit with this type of shocks???

Thank you very helpful 👍🏼

Muchas gracias excelente video mi 2008 f-550 🎉

This video saved me. I had to go to work and I wailed on the tank, got me to work, then I could call the tow to get it towed while at work.

Do you think this could affect gas mileage? I don’t have any code, however sometimes idling my car idles close to the 1000 RPM, sometimes is lower (around 780-800 RPM).

Thank you for making this video. Gave me the confidence I needed to do this job. Great step by step instruction. Not only did I fix my car I fixed my wife's car as well. So. Thank you from the whole family. Keep up the good work.

Smart guy. Thanks.

I learned many new things from the video. Thanks for your thorough explanation and demonstration. It was straightforward and educational.

I wish you worked where I have to take my Buick tomorrow for this issue. Great video. Thanks!

No more free oil changes for them. Thanks for video I had a switch change by mechanic but 6 months later oil light bach on.

Thanks for the video - nice job. Our ‘07 CRV has had intermittent AC issues. I replaced the compressor 2 years ago and had system evacuated, leak tested and recharged. Worked great. Now, at 216k miles it wasn’t cooling again. Bought gauges to troubleshoot high and low side. Saw compressor clutch wasn’t coming on. Took relay out to check and confirm right replacement to buy on Amazon (2 for $12!). Put old relay back in … now it works! I’m thinking it makes sense for twelve bucks to put a new relay in when they come. Any experience with Omron replacements from AMZN?

This video is as good as it gets, those 2 bolts in the back and from start to finish, thank you!

Where is your shop located? Im having the same issue with my 2007 Cadillac STS v8.

You made that look easy enough for me to fix. 😂 thank you!

Philip my 2013 es300h squeaks when I get on the brakes and i thought it was the abs pump / actuator. But i don't have the issue where my actuator is constantly cycling to try to prime pressure so I'm thinking its something else. What did is this squeaking im hearing. It sounds like it's coming from the cabin or engine bay. It's not at the rotors

This maybe a older video still helpful today.

Muchas. Muchas Grasias. Amigo me sirvió mucho dios te bendiga y sigue adelante 👌🙏compartiendo con la gente. Grasias fhillips

Really great video. Just finished and you couldnt have asked for a better tutorial. Driving these country roads at night will be much safer now that I removed the cataracts.

Just finished the front on my 2019 2.7 SCREW XLT. I found a wrecked 37k mile F150 on ebay and bought oem strut assemblies for $100 bucks per side and free shipping. Thanks to your video, I started at 8am and finished at 11:30am. 2wd was pretty easy. No fooling around with cv axles. THANKS AND SUBSCRIBED.

I finally got the crank bolt to break loose finally I can finish this project

What are the signs that you need this done ?

Thank you. I can see why there is so much appreciation here. I've been putting this off for months but when I watched three UA-cam's for this job and found yours I got the confidence, ordered the right parts on Amazon and two days ago I got the whole job done on my '05 Tacoma in less than three hours including a trip to the store for a couple missing screws that had rattled out. I do recommend having replacement plastic plugs and the two grill clips ready. On my old rig there were a bunch of brittle ones that snapped on the way out. Amazon had all I needed and not expensive but without the plastic parts I'd have been delayed a couple days getting them if I didn't have 'em on hand. The new lights worked great the first time and look great. I had a shop do the alignment because I didn't have a good place to do it plus i have a big lift on my truck and I don't want to be the guy that annoys other drivers with glare. It was your video that got my seventy-year old butt out there and got it done and it actually wasn't difficult. I hope that brings a smile buddy - you deserve it.

If you Please (1) What model and year of MaxiSys scanner are you using? (2) What is the least expensive decent scan tool to do the bleeding process? Just bought a 2007 Camry Hybrid, pads good, pump cycles often, no power brakes. I ordered a tested replacement ABS Module to install, Serial # 44510 30270 to match existing exactly. (3)- Would the different model year ABS Modules from 2007-2011 fit/be compatible without extra programming for the 2007 Camry Hybrid? My retired Toyota mechanic friend insisted that i get the EXACT Serial # 44510 30270 to match he says the tool I need to scan the codes and bleed it cost at least $5,000.00 Thank you Phillip

You are DA MAAAAN!! You make it look easy brother thank you for the educational video and expertise honda Accords have left me a tad afraid brother no joke I would much rather deal with a wife who has just found her guy in bed with another woman insisted of changing the headlight on a fkn Honda Accord for anyone reading my comment TAKE MY WORD 4 IT coming from a cheap bastard like me pay the money to have someone change it while you look an laugh at the shit they undergo Youll be glad you paid lol

@fixitphillip would it cause the vehicle to lose power also?

Helped me today thanks!!!